CDO 150

Roller Shutter Operator

The CDO - 150 Rolling Door Operator is available with a 1.1kw, 400v Three Phase Brake Motor. These models are fitted with either a Hand Crank, KE Hand Chain System or High Level Hand Chain System which enables the roller shutter door to be manually opened & closed when required

Stock Code(s):
3ph (24rpm) : 21-0908 (WGI), 21-0925 (HCR), 21-9140 (KE)
3ph (45rpm) : 21-0906 (WGI), 21-0926 (HCR), 21-9170 (KE)
Type        
Data
CDO-150 3ph c/w Hand Crank CDO-150 3ph c/w Floor Level Handchain (KE) CDO-150 3ph c/w High Level Handchain (WGI)
Power (kW)
1.1
Torque (Nm) 197 110 197 110 197 110
Output Speed (R.P.M.) 24 45 24 45 24 45
Number of Turns
40 (80 is available on request)
Protection (IP)
IP.54
Current (Amps)
3.1
Power Supply
400V / 3PH / 50Hz
Shaft Size (Inch)
∅1" shaft

CDO 150 Operator Packages

CDO 150 Wheel Guide Interlock, Braked, High Level Mechanical Limit (MLS) Built On Starter, Prewired  (Stock Code: 21-0908-100-HLM)

Operator, Prewired AS-100 HLM c/w Phase Change Plug, PBS Low Level, 10m Haul Chain & 12T 5/8x3/8" Sprocket.

CDO 150 Wheel Guide Interlock, Braked, Hook on, High level handchain override system, Horizontal Mount  24rpm Stock Code: 21-0908-250, 45rpm Stock Code: 21-0906-250

Operator, CS-250 Mini Starter, 10m Haul Chain & 12T 5/8x3/8" Sprocket.

CDO 150 KE Override, Braked, Floor level handchain override system 
24rpm Stock Code
: 21-9140-250, 45rpm Stock Code: 21-9170-250

Operator, CS-250 Mini Starter, 10m Haul Chain & 12T 5/8x3/8" Sprocket.